Product ID:M-BOND AE RESIN
MSDS Date:07/11/1995
FSC:8040
NIIN:00F048617
MSDS Number: BZFSB

MEASUREMENTS GROUP INC

RALEIGH, NC 27611-5000
US

Emergency Phone: 919-365-3800

Info Phone: 919-365-3800

Preparer: R L FRIDLEY

Cage: 88952

MEASUREMENTS GROUP INC

WENDELL, NC 27591 US

Telephone: 919-365-3800

Cage: 88952

2,2-BIS(4-(2,3-EPOXYPROPYLOXY)PHENYL)PROPANE, BISPHENOL A

CAS: 1675-54-3

RTECS: TX3800000

REACTION PRODUCTS OF EPICHLOROHYDRIN & BISPHENOL A

CAS: 25085-99-8

PHENYL GLYCIDYL ETHER-PGE (SUSPECTED ANIMAL CARCINOGEN BY

CAS: 122-60-1

RTECS: TZ3675000

Fraction By Weight: 4.160%

OSHA PEL 60 MG/CUM

ACGIH TLV: 6.1 MG/CUM

RESORCINOL, M-DIHYDROXYBENZENE

CAS: 108-46-3

RTECS: UG9625000

Fraction By Weight: 3%

ACGIH TLV: 45 MG/CUM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

1-CHLORO-2,3-EPOXYPROPANE, EPICHLOROHYDRIN (ANIMAL

CAS: 106-89-8

RTECS: TX4900000

OSHA PEL 5 PPM (SKIN)

ACGIH TLV: 2 PPM (SKIN)

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS

LD50 LC50 Mixture:ORAL LD50(RAT): >4000 MG/KG (SEE SUPP)
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHALATION: RESPIRATORY CONGESTION.
EYES: MAY CAUSE BURNING SENSATION, SEVERE IRRITATION W/POSSIBILITY
OF PERMANENT DAMAGE IF LEFT UNTREATED. SKIN: PRIMARY IRRITANT, CAN
CAUSE HYPEREMIA, DERMATITIS TO SUSCEPTIBLE INDIVIDUALS. INGESTION:
MAY CAUSE BURNS OF THE MOUTH & THROAT.
Explanation of Carcinogenicity:SEE INGREDIENTS.
Effects of Overexposure:CONGESTION, IRRITATION, BURNING, REDDENING,
ITCHING
Medical Cond Aggravated by Exposure:ALLERGIC SKIN REACTION & DERMATITIS
IN SENSITIVE INDIVIDUALS.

First Aid:EYES: IRRIGATE IMMEDIATELY FOR 15 MINS. SKIN: WASH W/SOAP &
WATER. FLUSH W/CLEAN WATER. INGESTION: GIVE LARGE AMOUNTS OF
WATER/MILK. DON'T INDUCE VOMITING. OBTAIN MEDICAL ATTENTION IN ALL
CASES. NOTE TO PHYSICIAN: IF LAVAGE IS PERFORMED, USE
ENDOTRACHEAL/ESOPHAGOSCOPIC CONTROL. TREAT BURNS AS THERMAL BURNS.
NO SPECIFIC ANTIDOTE. CARE & TREATMENT BASED ON JUDGEMENT OF
PHYSICIAN & PATIENT'S RESPONSE

Flash Point Method:PMCC
Flash Point:245F
Lower Limits:1.4
Extinguishing Media:CO2, DRY CHEMICAL, FOAM

Spill Release Procedures:SOAK UP W/ABSORBENT MATERIAL. RESIDUAL RESIN
MAY BE REMOVED USING STEAM/HOT SOAPY WATER.

Handling and Storage Precautions:STORE <80F IN A DRY PLACE. KEEP
CONTAINERS TIGHTLY CAPPED.
Other Precautions:AVOID PROLONGED BREATHING OF VAPORS & SKIN & EYE
CONTACT.

Respiratory Protection:USE W/ADEQUATE VENTILATION.
Ventilation:USE LOCAL EXHAUST/MECHANICAL GENERAL TO KEEP Protective Gloves:NEOPRENE/POLYETHYLENE
Eye Protection:CHEMICAL SAFETY GLASSES
Other Protective Equipment:NEOPRENE/POLYETHYLENE APRON, SAFETY SHOWER &
EYE WASH STATION.
Supplemental Safety and Health

Vapor Pres:1
Vapor Density:>3.8
Spec Gravity:1.15
Solubility in Water:NEGLIGIBLE
Appearance and Odor:AMBER TO CLEAR LIQUID

Stability Indicator/Materials to Avoid:YES
STRONG ALKALINE, ACID, AMINE & OXIDIZING MATERIALS
Stability Condition to Avoid:LARGE MASS REACTIONS IN EXCESS OF ONE
POUND (0.45 KG) W/ALIPHATIC AMINE SYSTEMS.
Hazardous Decomposition Products:FROM INCOMPLETE COMBUSTION: EPOXY
RESINS, PHENOLS, OXIDES OF SILICON & CARBON

Waste Disposal Methods:INCINERATE/DISPOSE OF IN ACCORDANCE W/LOCAL,
STAT E & FEDERAL REGULATIONS. TOXIC LIQUID UN2810

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.